Skunk2 Racing K Series BMF3 Camshaft Set - High-Performance Intake and Exhaust for Racing Applications

BMF camshafts are designed to optimize top-end horsepower and torque, with peak power moved up the RPM band. No other line of racing camshafts even comes close to Skunk2's BMF camshafts. The go to camshafts for an all-out racing effort! Ultra Series BMF3 Camshaft; Intake Dur./Lift 278 Deg./0.640 in.; Exhaust Dur./Lift 289 Deg./0.598 in.; Set of 2;

• Duration (Intake/Exhaust) 278 Degrees/289 Degrees At 1mm
• Lift (Intake/Exhaust) 0.640 in./0.598 in. At 0 Lash
• Profile Optimizes Area Under The Curve
• Most Powerful Camshafts On The Market
• 1 Lobe Forged Tool Steel Core

Upgrade your engine's top-end power with the Skunk2 Racing BMF3 camshaft set designed specifically for high-performance K Series engines. These ultra series camshafts are engineered to move peak power higher in the RPM band, providing maximum horsepower and torque for racing or aggressive driving. Crafted with precision, the intake camshaft features a duration of 278 degrees at 1mm lift with a lift of 0.640 inches at zero lash, while the exhaust camshaft boasts 289 degrees of duration with a lift of 0.598 inches. This combination ensures optimal airflow and power delivery at high RPMs. The profile of these camshafts is designed to optimize the area under the power curve, resulting in increased power output where it matters most. Built with a forged tool steel core, each camshaft offers durability and consistent performance under demanding conditions. This set is ideal for serious racers seeking to maximize engine output with the most powerful camshafts available on the market. The BMF3 camshafts are sold as a set of two, allowing for precise tuning and installation. Please note, these camshafts are not CARB approved and require carb acknowledgment prior to installation. Designed for off-road or racing use, they are not suitable for street-driven vehicles due to regulatory restrictions. Enhance your engine's performance with the Skunk2 Racing BMF3 camshafts, engineered for those who demand the utmost in racing power and reliability.

Features:

• Intake Duration: 278 degrees at 1mm lift with 0.640 inches lift at zero lash

• Exhaust Duration: 289 degrees at 1mm lift with 0.598 inches lift at zero lash

• Profile optimized to maximize area under the power curve

• Constructed with a forged tool steel core for durability

• Designed for high RPM horsepower and torque enhancement

• Sold as a set of two for comprehensive installation

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: false
Units Per Sku: 1