Mishimoto 21+ Ford Bronco 2.7L EcoBoost Intercooler Pipe Kit - Micro Wrinkle Black

The Bronco is back, and with two powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 325 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn't want more from their vehicle? We here at Mishimoto are never ones to settle for stock, so that's why we've developed these performance intercooler pipes for your 2021+ Ford Bronco 2.7L EcoBoost.----Our intercooler pipes are constructed from cast and mandrel-bent aluminum for unsurpassed durability. Unlike the stock plastic pipes, our cast-aluminum hot-side Y-pipe and throttle body inlet provide superior resistance to cracking after thousands of heat cycles. For even more durability, we've replaced the factory rubber sections with mandrel-bent aluminum for significantly increased boost tolerance. Serrated coupler connections at the Y-pipe and throttle body ensure your boost stays where you want it under even the most extreme conditions.----But durability isn't the only benefit these pipes offer. The Mishimoto performance intercooler pipes reduce restriction by up to 34.2-percent over the stock pipes. That increase in flow allows your Bronco to pull in more air for power gains of over 5 HP and 6.1 lb-ft. of torque on the stock tune.----If you're ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, these Mishimoto Performance Intercooler Pipes are for you. And, like all Mishimoto products, they're backed by our Lifetime Warranty, so you can drive easy knowing we've got you covered. Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

• Dyno-proven power gains of 5.4 HP and 6.1 lb-ft. of torque on stock tune
• 2-1/4-inch to 2-1/2-inch hot-side piping and 2-3/4-inch cold-side piping
• Up to 34.2-percent less restrictive than stock pipes

Upgrade your 2021+ Ford Bronco with Mishimoto's high-performance intercooler pipe kit, designed specifically for the 2.7L EcoBoost engine. Crafted from cast and mandrel-bent aluminum, this kit offers exceptional durability and resistance to cracking caused by heat cycles. The cast-aluminum hot-side Y-pipe and throttle body inlet ensure a reliable, long-lasting connection, while replacing the factory rubber sections with aluminum components increases boost tolerance and reduces restriction. Serrated coupler connections at critical points secure the pipes firmly, preventing boost leaks even under extreme conditions. Improving airflow between the turbo and intercooler, these pipes reduce pressure loss and enhance throttle response, translating to measurable power gains. Dyno tests show an increase of over 5 horsepower and 6.1 lb-ft of torque on the stock tune, making this an excellent upgrade for enthusiasts seeking improved performance without reprogramming. The piping sizes, ranging from 2-1/4 inch to 2-1/2 inch on the hot side and 2-3/4 inch on the cold side, are optimized for maximum airflow, contributing to a more responsive driving experience. Backed by Mishimoto’s lifetime warranty, these intercooler pipes offer peace of mind along with improved engine efficiency and reliability. Whether you're off-road or on the street, this kit provides a precise fit and increased durability for the demanding conditions of the Bronco's adventurous drives. Installation is straightforward, and the materials used ensure long-term performance, making it an ideal upgrade for your vehicle's turbo system. If you're serious about maximizing your Bronco's potential and ensuring longevity under high boost, the Mishimoto intercooler pipe kit is an essential addition to your performance arsenal.

Features:

• Dyno-proven power gains of 5.4 HP and 6.1 lb-ft. of torque on stock tune

• 2-1/4 inch to 2-1/2 inch hot-side piping and 2-3/4 inch cold-side piping

• Up to 34.2 percent less restrictive than stock pipes

• Constructed from cast and mandrel-bent aluminum for durability

• Replaces factory rubber sections for increased boost tolerance

• Serrated coupler connections ensure secure fit under extreme conditions

• Designed specifically for 2021+ Ford Bronco 2.7L EcoBoost models

• Improves airflow, throttle response, and overall engine efficiency

• Backed by Mishimoto's lifetime warranty for peace of mind

Fitment:
2021 Ford Bronco Badlands
2021 Ford Bronco Base
2021 Ford Bronco Big Bend
2021 Ford Bronco Black Diamond
2021 Ford Bronco First Edition
2021 Ford Bronco Outer Banks
2021 Ford Bronco Wildtrak
2022 Ford Bronco Badlands
2022 Ford Bronco Base
2022 Ford Bronco Big Bend
2022 Ford Bronco Black Diamond
2022 Ford Bronco Outer Banks
2022 Ford Bronco Wildtrak
2023 Ford Bronco Badlands
2023 Ford Bronco Base
2023 Ford Bronco Big Bend
2023 Ford Bronco Black Diamond
2023 Ford Bronco Heritage Limited Edition
2023 Ford Bronco Outer Banks
2023 Ford Bronco Wildtrak

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Clearance Item: t
Regular Stock: t
Units Per Sku: 1