Mishimoto 2013+ Ford Focus ST Intercooler Pipe Kit - Wrinkle Black

Open up the flow of the charged air in your 2013-2018 Ford Focus ST with the Mishimoto Performance Intercooler Piping Kit. The piping equipped on the 2.0L EcoBoost engine from the factory is riddled with bends, restrictive piping diameters, and degradation-prone materials, all of which slow the air to and from your intercooler putting a strain on the FOST?s performance. We here at Mishimoto'strive to free the flow of the charged air in your sporty Focus. To start we removed the turbo muffler from the design of the hot-side stock piping, and reduced the amount of bends giving the airflow a more direct flow from the turbo to the intercooler. On top of the reduction of bends, we increased the inner diameter of the piping to 2.5 inches of high-grade aluminum, allowing for a 14-percent increase in volume and 26-percent greater flow over the stock equipment. The stock rubber connections have also been replaced with sturdy silicone couplers to ensure solid connection between piping and intercooler. The improvements don?t stop with the hot-side piping. The cold-side piping received an overhaul as well, replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers, ensuring that the cold-side airflow stays cool. For added support, the single section of piping is reinforced with steel wire ensuring that it keeps its shape under heavy load. Speaking of shape, the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator.The result of adding the Mishimoto full Performance Intercooler and Piping kit to your 2013-2018 Focus ST in conjunction with the Mishimoto Performance intake is a 21-percent increase in flow of the charged air through the system, and an additional 8hp and 10ft/lb of torque boost on top of intake and intercooler gains on the stock tune. Intercooler pipe set designed to improve airflow between turbo and intercooler for enhanced performance. Durable piping reduces pressure loss, improves throttle response, and ensures a precise fit for reliable installation.

• 8 hp/ 10 tq gains when combined with other Mishimoto Focus ST parts
• 10-percent increase in volume over stock cold side pipe
• 14-percent increase in volume over stock hot side pipe

Enhance the airflow and boost the performance of your 2013-2018 Ford Focus ST with the Mishimoto Performance Intercooler Pipe Kit. Designed specifically for the 2.0L EcoBoost engine, this kit addresses the factory-installed piping's restrictions, such as excessive bends, limited diameter, and materials prone to degradation, which can hinder optimal turbocharged airflow. By replacing the stock hot-side piping with a direct-flow design featuring a 2.5-inch diameter high-grade aluminum pipe, Mishimoto significantly increases volume and airflow capacity, resulting in approximately 14% more volume and 26% greater flow compared to stock components. The hot-side piping modifications include eliminating the turbo muffler and reducing bends, which allows for a more efficient and less restrictive path from the turbocharger to the intercooler. The cold-side piping has also been upgraded from rubber to durable, heat-resistant silicone with five layers of reinforcement, ensuring the cold airflow remains cool and consistent under demanding conditions. Reinforced with steel wire, the cold-side pipe maintains its shape even under heavy load, providing reliable performance over time. This kit features an elliptical cold pipe shape to properly fit the increased size of Mishimoto’s Performance Radiator, ensuring seamless integration within the engine bay. When paired with Mishimoto’s full Performance Intercooler and Intake, this piping kit contributes to a total 21% increase in charged air flow, delivering an 8 horsepower and 10 ft/lb torque boost over stock, enhancing throttle response, and supporting overall engine efficiency. Crafted with high-quality materials and precise engineering, the Mishimoto Intercooler Pipe Kit offers a reliable upgrade for enthusiasts seeking to maximize their Focus ST’s performance. Its compatibility with 2013 through 2018 models makes it an ideal choice for owners looking for a straightforward, durable, and effective airflow upgrade that complements existing performance parts and tuning efforts.

Features:

• Significant increase in airflow volume and flow rate for improved turbocharged performance

• Hot-side piping: 14% larger volume and direct flow design reduces restrictions

• Cold-side piping: constructed with five-layer heat-resistant silicone and reinforced with steel wire for durability and shape retention

• Includes silicone couplers for secure and reliable connections

• Designed to work with Mishimoto Performance Intercooler and Intake for maximum gains

• Enhances throttle response and overall engine efficiency

• Engineered specifically for 2013-2018 Ford Focus ST models

Fitment:
2013 Ford Focus ST
2014 Ford Focus ST
2015 Ford Focus ST
2016 Ford Focus ST
2017 Ford Focus ST
2018 Ford Focus ST

Air Freight Prohibited: false
Not Carb Approved: false
Carb Eo Number: D-759-6
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: Compliant
Carb Acknowledgement Required: false
Number Of Boxes: 2
Regular Stock: t
Units Per Sku: 1