H&R Trak+ 17mm DR Wheel Adaptor Bolt 5/114.3 Center Bore 67 Bolt Thread 14x1.5

H&R Trak+ Wheel Spacers move your wheels out so they are flush with the fender-instantly giving your vehicle the perfect stance. Whether you want improved handling, increased safety, or simply want your car to make a statement about your individual style, Trak+ Wheel Spacers can help you accomplish your goal and GO WIDE. Manufactured from a special proprietary alloy that has a higher tensile strength than 6061-T6 billet aluminum, H&R Trak+ Wheel Spacers are hub centric featuring a full contact hub-just like the factory hub-for even load force distribution and lateral support. H&R Springs Trak+(TM) Wheel Spacers (2x) All DR-Systems require longer wheel bolts. These must be ordered separately. H&R Wheel Spacer Bolts are listed here. When ordering wheel bolts, please follow these guidelines: a) If possible, name the brand of wheel. b) New bolts must be longer than the original bolts by the width of the wheel spacer used. c) The bolt head must be identical to the existing bolt: Taper 60 End digit 01 Round head for M12/d24 mm, for M14/d28 mm End digit 02 Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03 Flat head for Porsche original wheels M14 x 1.5 End digit 06 d) Safety guidelines (Minimum number of turns for wheel bolts / nuts): M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc.). Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm -- i.e. Rear Axle Mercedes).

• Moves your wheels outward so they are flush with the fender, instantly giving you the perfect stance
• Hub centric design, proprietary alloy, higher strength, lighter weight
• Extended length hardware available
• made in Germany

Fitment:
2004 Maserati Quattroporte Base
2005 Maserati Quattroporte Base
2006 Maserati Quattroporte Executive GT
2006 Maserati Quattroporte Sport GT
2007 Maserati Quattroporte Base
2007 Maserati Quattroporte Executive GT
2007 Maserati Quattroporte Sport GT
2008 Maserati GranTurismo Base
2008 Maserati Quattroporte Base
2008 Maserati Quattroporte Executive GT
2008 Maserati Quattroporte Sport GT
2009 Ferrari California Base
2009 Maserati GranTurismo Base
2009 Maserati GranTurismo S
2010 Ferrari 458 Italia Base
2010 Ferrari California Base
2010 Maserati GranTurismo Base
2010 Maserati GranTurismo S
2011 Ferrari 458 Italia Base
2011 Ferrari California Base
2011 Maserati GranTurismo Base
2011 Maserati GranTurismo S
2012 Ferrari 458 Italia Base
2012 Ferrari California Base
2012 Maserati GranTurismo Base
2012 Maserati GranTurismo MC
2012 Maserati GranTurismo S
2012 Maserati GranTurismo Sport
2013 Ferrari 458 Italia Base
2013 Ferrari California Base
2013 Maserati GranTurismo Base
2013 Maserati GranTurismo MC
2013 Maserati GranTurismo Sport
2014 Ferrari 458 Italia Base
2014 Maserati GranTurismo Base
2014 Maserati GranTurismo MC
2014 Maserati GranTurismo Sport
2015 Ferrari 458 Italia Base
2015 Maserati GranTurismo MC
2015 Maserati GranTurismo Sport
2016 Maserati GranTurismo Base
2016 Maserati GranTurismo MC
2016 Maserati GranTurismo Sport

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Unknown
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1