Borla ATAK 3-Inch Cat-Back Exhaust System for 2020-2025 Chevrolet Corvette C8 with E-Ray and NPP Valves

2024-2025 includes E-Ray. Developing systems for the C8 Corvette presented BORLA® engineers with unique challenges, but our team was up to the challenge. This 3" inlet Cat-Back® system includes both AFM ('20-'21)/ DFM ('22-'25) valves and NPP dual mode exhaust valves. It features the aggressive ATAK® sound for an exciting driving experience with no drone inside the vehicle. It features our Polyphonic Harmonizer and SwitchFire® technology. BORLA®'S Polyphonic Harmonizer Technology utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound. Completely eliminating the turbulent center intersection of a standard X-Pipe, BORLA®'S patented SwitchFire® design truly blends the combustion pulses from both sides of the engine for improved performance and a custom aggressive sound. Strategically placed heat shielding is included to prevent exhaust heat damage and protect your Corvette. It comes with quad (2 each side) 4" round carbon fiber tips with bright centers. Systems are also available with bright chrome on T-304 stainless steel tips, or black chrome on T-304 stainless steel tips. The system is constructed using T-304 stainless steel and is backed by our Million Mile Warranty. System ships in 2 boxes. Note: After installation of the BORLA® system, the controllers for the AFM/ DFM and NPP valves in the exhaust system should be RE-CALIBRATED according to GM Document ID 5406413. BORLA® recommends taking your car to the nearest Chevrolet dealer for the recalibration service. ATAK® Cat-Back™ Exhaust System 2020-2025 Chevrolet Corvette (C8) 6.2L V8 Automatic Transmission Rear Wheel Drive With AFM ('20-'21)/ DFM ('22-'25) Valves And With NPP Valves. 2024-2025 Includes E-Ray. 2020-2025 Chevrolet Corvette (C8) 6.2L V8 Automatic Transmission Rear Wheel Drive With AFM ('20-'21)/ DFM ('22-'25) Valves With NPP Valves. 2024-2025 Includes E-Ray.

• Includes AFM ('20-'21)/ DFM ('22-'25) and NPP Valves. Do NOT install on vehicles without O.E. NPP.
• Valve actuator recalibration REQUIRED after installation (Click for details)
• System contains Polyphonic Harmonizer and SwitchFire® Technology
• System ships in 2 boxes

Upgrade your Chevrolet Corvette C8 with the Borla 2020-2025 ATAK Cat-Back Exhaust System, designed specifically for the 6.2L V8 models including E-Ray variants. This high-performance system features a 3-inch inlet diameter and is engineered to deliver an aggressive, full-bodied exhaust note without drone, enhancing your driving experience. Constructed from durable T-304 stainless steel, the system offers excellent corrosion resistance and longevity backed by Borla’s Million Mile Warranty. The exhaust incorporates innovative Polyphonic Harmonizer and SwitchFire® Technology, which utilize pipes of varying diameters and lengths to produce harmonized exhaust notes, resulting in a rich and dynamic sound profile. The unique SwitchFire® design eliminates turbulent center intersections common in standard X-pipes, blending pulses from both sides of the engine for improved performance and a commanding exhaust tone. For an aesthetic upgrade, the system includes quad 4-inch round carbon fiber tips with bright centers, though options with chrome or black chrome tips are also available. The system features strategically placed heat shielding to protect your vehicle from exhaust heat damage. Installation requires recalibration of the AFM/DFM and NPP valves, which is recommended to be performed at a Chevrolet dealership for optimal performance and sound. The system ships in two boxes and is suitable for rear-wheel-drive models with automatic transmissions. The Borla ATAK exhaust system is designed exclusively for vehicles equipped with NPP valves and AFM/DFM systems, ensuring compatibility and maximum performance. It is important to note that this system is not CARB approved, and proper acknowledgment of Prop 65 regulations is required. Enhance your Corvette’s sound, performance, and style with Borla's premium exhaust system, engineered to deliver an exhilarating driving experience with a sleek, aggressive appearance and unmatched durability.

Features:

• Includes AFM ('20-'21)/ DFM ('22-'25) and NPP valves, compatible only with vehicles equipped with OEM NPP

• Recalibration of valve actuators required after installation; recommended at a Chevrolet dealership

• s Borla’s Polyphonic Harmonizer and SwitchFire® Technology for a rich, aggressive exhaust tone

• Constructed from high-quality T-304 stainless steel for durability and corrosion resistance

• Includes quad 4-inch round carbon fiber tips with bright centers, with optional chrome or black chrome finishes

• Strategically placed heat shielding to prevent heat damage and protect vehicle components

• Ships in two boxes for convenient handling and installation

• Designed specifically for 2020-2025 Chevrolet Corvette C8 models, including E-Ray variants

Fitment:
2020 Chevrolet Corvette Stingray
2021 Chevrolet Corvette Stingray
2022 Chevrolet Corvette Stingray
2023 Chevrolet Corvette Stingray
2024 Chevrolet Corvette Stingray
2025 Chevrolet Corvette Stingray

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Number Of Boxes: 2
Regular Stock: t
Units Per Sku: 1