Launching harder, reducing wheel hop, and repositioning the instant center on your S197 Mustang is easy with lower control arm relocation brackets from BMR's suspension. BMR's bolt-on relocation brackets for S197 Mustangs are the ultimate in strength and adjustability. The stock lower control arm mounting location can give you insufficient lower control arm angle on lowered vehicles. BMR's control arm relocation brackets allow you to correct the lower control arm angle, correcting the rear suspension geometry and allowing you to add anti-squat for increased traction. Manufactured from heavy-duty 3/16- and 1/4-inch laser cut, CNC-formed steel plate, the CAB005 are designed to bolt in place, making installation simple and easy. The stock control arm mounting position is fine for stock height vehicles, but once you lower your car, the control arms change and need to be corrected. The CAB005s allow you lower the lower control arms' rear mounting position by as much as 3 inches, correcting the control arm angles. This also allows you to make instant center changes for race applications. BMR's suspension designed the CAB005 to work well in street performance, drag race, and road race applications. It is engineering to bolt on and stand up to extremely high horsepower and torque levels, as well as the hardest drag strip launches without moving on the rearend housing. When performance is a must, rely on BMR's suspension! BMR's suspensions CAB005 bolt-on lower control arm relocation brackets come uncoated. Installation time is about 2-3 hours. Proudly made in the U.S.A. The BMR Control Arm Relocation Brackets correct the vehicles instantaneous center, improving drag strip traction and handling traction during corner exiting. BMR can proudly claim that these Relocation Brackets are the only brackets in the industry that have been 1.1 sixty-foot times, BOLTED-ON! We also have many 1.2, 1.3 and 1.4 60-foot combinations running these same pieces.
The CAB005s allow you lower the lower control arms' rear mounting position by as much as 3 inches, correcting the control arm angles.
Built from a blend of ?-inch and 3/16-inch Laser cut, CNC-formed steel plate
Fitment:
2005 Ford Mustang Base
2005 Ford Mustang GT
2006 Ford Mustang Base
2006 Ford Mustang GT
2007 Ford Mustang Base
2007 Ford Mustang GT
2007 Ford Mustang Shelby GT
2007 Ford Mustang Shelby GT500
2008 Ford Mustang Base
2008 Ford Mustang Bullitt
2008 Ford Mustang GT
2008 Ford Mustang Shelby GT
2008 Ford Mustang Shelby GT500
2008 Ford Mustang Shelby GT500KR
2009 Ford Mustang Base
2009 Ford Mustang Bullitt
2009 Ford Mustang GT
2009 Ford Mustang Shelby GT500
2009 Ford Mustang Shelby GT500KR
2010 Ford Mustang Base
2010 Ford Mustang GT
2010 Ford Mustang Shelby GT500
2011 Ford Mustang Base
2011 Ford Mustang GT
2011 Ford Mustang Shelby GT500
2012 Ford Mustang Base
2012 Ford Mustang Boss 302
2012 Ford Mustang GT
2012 Ford Mustang Shelby GT500
2013 Ford Mustang Base
2013 Ford Mustang Boss 302
2013 Ford Mustang GT
2013 Ford Mustang Shelby GT500
2014 Ford Mustang Base
2014 Ford Mustang GT
2014 Ford Mustang Shelby GT500
| Air Freight Prohibited: false |
| Not Carb Approved: false |
| Ltl Freight Required: false |
| Prop 65: Unknown |
| Part Type: automotive |
| Epa: N/A |
| Carb Acknowledgement Required: false |
| Regular Stock: t |
| Units Per Sku: 1 |
Product Details
Vehicle Fitment
Features
