Skunk2 Alpha Series Honda B18C Connecting Rods – Forged 4340 Chromoly, H-Beam Design, Rated for Over 900 HP

Alpha Series Rods are forged from select 4340 chromoly steel and feature an H-beam design, resulting in the ultimate strength-to-weight ratio. 4340 chromoly is one of the strongest materials available, however, not all 4340 chromoly is the same. As such, Skunk2 relies on extensive material testing and works closely with its foundry to produce high-quality rods at an affordable price. Comprehensive heat-treating, tempering, and shot-peening processes together ensure that each Alpha Series Rod remains consistent and strong. Finally, each rod is magna-fluxed to ensure integrity and that each process has been completed thoroughly and according to Skunk2's rigid specifications. Skunk2's engineers spent nearly three years developing and testing its H-beam rod design. The results are one of the strongest beam configurations available, capable of handling more than 900 hp. Engineers made use of FEA (Finite Element Analysis) to determine high-stress points and implemented features to reduce wear and increase strength. Skunk2's straight design distributes stress across a larger area when compared to tapered rods, providing additional support where necessary. Alpha Series Rods are manufactured from two-piece forgings, resulting in optimal grain orientation along the rod cap for increased strength. By orienting the metal's grain in the direction of stress along the rod cap, perpendicular to the stress exerted along the beam, strength is significantly increased. Skunk2's two-piece forgings provide a precision-tight fit between the rod's cap and its beam without resorting to the brittle materials required by other processes. Alpha Series Rods also feature dual oil passages at their pin ends, providing additional lubrication and cooling, which leads to an even stronger, more durable rod. Unlike other designs, Skunk2's carefully positioned, offset oil passages help deliver lubrication around the entire wrist pin, during each phase of the engine cycle. Alpha Series Connecting Rod Set; 138.00mm Length; 489 Grams; Rated to 900HP; H-Beam; Incl. 3/8 ARP2000 Bolts/Lube; 4340 Chromoly Steel; Set of 4;

• Dual-Pin Oil Passages For Increased Lubrication And Strength
• Pin End Compatible w/Most Pistons w/o Machining
• Shot-Peened For Reduced Fatigue
• 3/8-in. ARP2000/Skunk2 Bolts
• Bronze Wrist Pin Bushings
• Magna-flux Inspected
• Balanced +/- 1 Gram
• Weight 510 grams
• Length 138.00mm
• 900+ HP Capable
• Heat Treated
• FEA Analyzed

Upgrade your Honda B18C engine with the Skunk2 Alpha Series Connecting Rods, engineered for high performance and durability. Crafted from premium 4340 chromoly steel, these rods feature an advanced H-beam design that offers an exceptional strength-to-weight ratio, making them ideal for high-horsepower applications. Each rod undergoes comprehensive heat-treating, tempering, and shot-peening processes, ensuring consistency and resilience under extreme conditions. The rods are magna-fluxed for integrity verification, providing peace of mind that each piece meets rigorous quality standards. Designed after nearly three years of engineering and testing, these Alpha Series rods utilize Finite Element Analysis to optimize stress distribution and reduce wear, enabling reliable operation at over 900 horsepower. Their straight, non-tapered design distributes stress more evenly across the entire length of the rod, minimizing fatigue and enhancing durability. Manufactured from two-piece forgings, the rods have a precise fit between the cap and beam, with grain orientation aligned along stress paths to maximize strength. Dual oil passages at the pin ends facilitate superior lubrication and cooling, critical for high RPM and high load environments. These passages are carefully positioned to deliver lubrication around the wrist pin throughout every engine cycle, promoting longevity and consistent performance. Compatible with most pistons without additional machining, the rods feature bronze wrist pin bushings, 3/8-inch ARP2000 bolts, and are balanced to within +/- 1 gram for smooth operation. Whether building a high-performance street engine or a race-ready setup, the Skunk2 Alpha Series Connecting Rods provide the reliability and strength needed to achieve maximum horsepower without compromise. This set of four rods is designed specifically for Honda B18C engines from 1994 to 2001, ensuring precise fitment and optimal performance for your build.

Features:

• Forged from premium 4340 chromoly steel for maximum strength and durability

• H-beam design with optimized stress distribution for high horsepower applications

• Comprehensive heat treatment, tempering, and shot-peening for consistent quality

• Magna-flux inspected to ensure structural integrity

• Dual oil passages provide enhanced lubrication and cooling during engine operation

• Two-piece forging with precise fit for increased strength and reliability

• Grain orientation aligned along stress paths for maximum durability

• Compatible with most pistons without additional machining

• Includes bronze wrist pin bushings and 3/8-inch ARP2000 bolts

• Balanced to within +/- 1 gram for smooth engine operation

Fitment:
1994 Acura Integra GS-R
1995 Acura Integra GS-R
1996 Acura Integra GS-R
1997 Acura Integra GS-R
1997 Acura Integra Type R
1998 Acura Integra GS-R
1998 Acura Integra Type R
1999 Acura Integra GS-R
2000 Acura Integra GS-R
2000 Acura Integra Type R
2001 Acura Integra GS-R
2001 Acura Integra Type R

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1