Mishimoto Oil Line Kit for Mazda RX-8 (2004-2011) - Reinforced Braided Stainless Steel Lines and Aluminum Fittings

The Mazda RX8 has a high-winding rotary engine capable of easy reaching 9,000RPMs on a daily basis. With those revs comes very high oil temperatures. Most RX8 models with manual transmissions were outfitted with dual oil coolers from the factory to keep the rotary engine's oil at a safe temperature during high speed driving and track situations. Unfortunately, over time, the stock rubber oil lines and steel fittings can severely corrode and degrade over time. This full kit from Mishimoto replaced all oil lines with braided stainless units and aluminum fittings that will not corrode or degrade over time. This kit also replaces the most frequent line to corrode, which is located on the left hand side of the car near the front suspension assembly. With the Mishimoto replacement oil line kit, all oil lines between the engine, and both oil coolers are replaced, including the intermediate line that spans both oil coolers found in all manual transmission models. The oil line fits onto the vehicle with no additional modification, and does not require any cutting to your vehicle or permanent removal of parts. This oil line kit comes with all banjo bolts, M18 fittings, and a male to male -10AN connector to complete the installation. Keep you RX8 protected and running smooth! As with all our products, this kit includes the Mishimoto Lifetime Warranty. High-performance component designed to enhance thermal efficiency, durability, and reliability under demanding conditions. Engineered to support optimal temperature control and system performance across applications. 2008 Mazda RX-8 40th Anniversary Edition 1.3 Liter, 2008 Mazda RX-8 40th Anniversary Edition 1.3 Liter, 2004-2007 Mazda RX-8 Base 1.3 Liter, 2004-2007 Mazda RX-8 Base 1.3 Liter, 2008-2011 Mazda RX-8 Grand Touring 1.3 Liter, 2008-2011 Mazda RX-8 Grand Touring 1.3 Liter, 2009-2011 Mazda RX-8 R3 1.3 Liter, 2005 Mazda RX-8 Shinka 1.3 Liter, 2005 Mazda RX-8 Shinka 1.3 Liter, 2008-2011 Mazda RX-8 Sport 1.3 Liter, 2008-2011 Mazda RX-8 Sport 1.3 Liter, 2008-2009 Mazda RX-8 Touring 1.3 Liter, 2008-2009 Mazda RX-8 Touring 1.3 Liter

• Full kit includes four braided stainless steel oil lines, M18 banjo bolts, and all the necessary fittings and oil seals for a trouble-free installation
• Premade braided stainless steel oil lines and aluminum fittings replace corrosion-prone stock rubber lines
• Oil lines come prelabeled for easy identification

Upgrade your Mazda RX-8's oil cooling system with the Mishimoto Oil Line Kit, designed specifically for models from 2004 to 2011. This comprehensive kit replaces the factory rubber oil lines with durable braided stainless steel hoses and corrosion-resistant aluminum fittings, ensuring enhanced thermal efficiency and long-term reliability. The kit includes four pre-labeled oil lines, M18 banjo bolts, and all necessary fittings and seals for a straightforward installation without modifications or cutting, making it suitable for both daily drivers and high-performance applications.

The Mishimoto Oil Line Kit is engineered to withstand the high oil temperatures generated during high RPM operation, especially in models with factory dual oil coolers. By replacing the original rubber lines, which are prone to corrosion and degradation over time, this kit helps maintain optimal oil flow and temperature regulation. The braided stainless steel hoses are built to resist wear and corrosion, providing peace of mind under demanding conditions. All components are included to facilitate a trouble-free installation, supported by Mishimoto's lifetime warranty for added confidence.

Whether you're upgrading a stock vehicle or preparing for track use, this high-performance component enhances your RX-8’s cooling system, supporting peak engine performance and longevity. Compatible with a range of Mazda RX-8 models including the 40th Anniversary Edition, Grand Touring, R3, and Sport editions, this kit is an essential upgrade for enthusiasts seeking durability and consistent system performance.

Features:

• Full kit includes four braided stainless steel oil lines, M18 banjo bolts, and all necessary fittings and seals for easy installation

• Replaces corrosion-prone stock rubber lines with durable, corrosion-resistant braided stainless steel hoses

• Pre-labeled oil lines for simplified identification and installation

• Designed to withstand high oil temperatures and demanding driving conditions

• No modifications or cutting required for installation, suitable for stock and high-performance setups

• Includes all fittings and seals needed for a complete and trouble-free upgrade

• Backed by Mishimoto's lifetime warranty for long-term peace of mind

Fitment:
2004 Mazda RX-8 Base
2005 Mazda RX-8 Base
2005 Mazda RX-8 Shinka
2006 Mazda RX-8 Base
2007 Mazda RX-8 Base
2008 Mazda RX-8 40th Anniversary Edition
2008 Mazda RX-8 Grand Touring
2008 Mazda RX-8 Sport
2008 Mazda RX-8 Touring

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1